Attribution Tables of Division B 5.11.1.1.
| Table 5.11.1.1. Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 5 Forming part of Sentence 5.11.1.1.(1) | |
| Acceptable Solutions | Functional Statements and Objectives(1) |
| 5.1.4.1. Structural and Environmental Loads | |
| (1) | (a) [F55,F61,F63-OH1.1,OH1.2,OH1.3] |
| [F20-OS3.1] Applies to snow fences and sloped glazing. | |
| [F61-OH4] | |
| (a) [F60,F61,F63-OS2.2,OS2.3] | |
| (a) [F20,F51,F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| (b) [F20-OS2.1] [F21,F22-OS2.3,OS2.4] | |
| (b) [F20,F21,F22-OH1.1,OH1.2,OH1.3] | |
| (b) [F20-OH4] | |
| (3) | [F20-OS2.1] [F21,F22-OS2.3,OS2.4] |
| [F20,F21,F22-OH1.1,OH1.2,OH1.3] | |
| (4) | (a) [F20-OS2.1] [F21,F22-OS2.3,OS2.4] |
| (a) [F20,F21,F22-OH1.1,OH1.2,OH1.3] | |
| (b) [F20-OS2.1] [F21,F22-OS2.3,OS2.4] | |
| (b) [F20,F21,F22-OH1.1,OH1.2,OH1.3] | |
| (5) | [F20,F21,F22-OH1.1,OH1.2,OH1.3] |
| (a) [F20-OS2.1,OS2.3] (b) and (c) [F21,F22-OS2.3] |
|
| (b) and (c) [F22-OH4] | |
| 5.1.4.2. Resistance to Deterioration | |
| (1) | [F80,F81-OH1.1,OH1.2,OH1.3] |
| [F80,F81-OS3.1] Applies to floor assemblies. | |
| [F80,F81-OH4] Applies to floor assemblies. | |
| [F80,F81-OS2.3] | |
| [F80,F81-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| 5.2.1.1. Exterior Environmental Loads | |
| (2) | [F40,F20-OH1.1] [F20-OH1.2,OH1.3] |
| [F20-OS2.1] | |
| 5.2.1.2. Interior Environmental Loads | |
| (1) | [F51,F55,F61,F63-OH1.1,OH1.2] |
| [F55,F61,F63-OS2.3] | |
| [F51,F61,F63,F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| 5.2.1.3. Environmental Load and Transfer Calculations | |
| (1) | [F56-OH3.1] Applies to sound transmission calculations. |
| [F61,F51,F63,F55-OH1.1,OH1.2] [F51,F61-OH1.3] Applies to heat, air and moisture transfer calculations. | |
| [F61,F51,F63-OS2.3] Applies to heat, air and moisture transfer calculations. | |
| (3) | [F61,F63,F55-OH1.1,OH1.2] [F61,F55-OH1.3] |
| [F20-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| [F20-OS2.1] | |
| 5.2.2.1. Determination of Structural Loads and Effects | |
| (1) | [F20-OS2.1] [F21,F22-OS2.3,OS2.4] |
| [F20,F21,F22-OH1.1,OH1.2,OH1.3] | |
| [F20,F21,F22-OH4] | |
| (3) | [F20-OS2.1] [F21,F22-OS2.3,OS2.4] |
| [F20,F21,F22-OH1.1,OH1.2,OH1.3] | |
| [F20,F21,F22-OH4] | |
| 5.2.2.2. Determination of Wind Load | |
| (2) | [F20-OS2.1] [F22-OS2.3,OS2.4] |
| [F20,F22-OH1.1,OH1.2,OH1.3] | |
| [F20,F22-OH4] | |
| (3) | [F20-OS2.1] [F22-OS2.3,OS2.4] |
| [F20,F22-OH1.1,OH1.2,OH1.3] | |
| [F20,F22-OH4] | |
| 5.2.2.3. Design Procedures | |
| (1) | [F20-OS2.1] [F22-OS2.3,OS2.4] |
| [F20,F22-OH1.1,OH1.2,OH1.3] | |
| [F20,F22-OH4] | |
| 5.3.1.1. Required Resistance to Heat Transfer | |
| (1) | [F63-OH1.1] [F51,F63-OH1.2] |
| [F63-OS2.3] | |
| [F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| 5.3.1.2. Properties to Resist Heat Transfer or Dissipate Heat | |
| (1) | (a),(b) [F51,F63-OH1.1] (c) [F51-OH1.2] |
| (b) and (d) [F51,F63-OS2.3] | |
| (b) [F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| (d) [F30-OS3.1] | |
| 5.3.1.3. Location and Installation of Materials Providing Thermal Resistance | |
| (1) | [F51,F63-OH1.1] |
| [F63-OS2.3] | |
| (2) | [F51,F63-OH1.1,OH1.2] |
| [F63-OS2.3] | |
| [F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| (3) | [F51,F63-OH1.1,OH1.2] [F41-OH1.1] |
| [F63-OS2.3] | |
| [F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| 5.4.1.1. Required Resistance to Air Leakage | |
| (1) | (a),(b),(f) [F51,F52,F54,F55-OH1.2] (a),(b),(c),(e) [F40,F55-OH1.1] (c) [F55,F61,F63-OH1.3] |
| (c) and (d) [F61,F62,F63,F55-OS2.3] | |
| (d) [F55,F62-OS3.1] | |
| (f) [F55,F62-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| (2) | [F40-OH1.1] [F52,F54-OH1.2] [F51,F55,F61,F63-OH1.1,OH1.2,OH1.3] |
| [F61,F63-OS2.3] | |
| [F51,F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| 5.4.1.2. Air Barrier System Properties | |
| (1) | [F55-OH1.1,OH1.2,OH1.3] |
| [F55-OS2.3] | |
| [F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| (3) | [F61,F51,F63,F55-OH1.1,OH1.2] [F55,F61-OH1.3] |
| [F61,F63-OS2.3] | |
| [F61,F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| 5.5.1.1. Required Resistance to Vapour Diffusion | |
| (1) | [F63-OH1.1,OH1.2] |
| [F63-OS2.3] | |
| (2) | [F63-OH1.1,OH1.2] |
| [F63-OS2.3] | |
| 5.5.1.2. Vapour Barrier Properties and Installation | |
| (1) | [F63-OH1.1,OH1.2] |
| [F63-OS2.3] | |
| (2) | [F63-OH1.1,OH1.2] |
| [F63-OS2.3] | |
| (3) | [F63-OH1.1,OH1.2] |
| [F63-OS2.3] | |
| 5.6.1.1. Required Protection from Precipitation | |
| (1) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| 5.6.1.2. Installation of Protective Materials | |
| (1) | [F61-OH1.1,OH1.2,OH1.3] |
| [F20-OS2.1] [F61-OS2.3] | |
| (2) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.1,OS2.3] | |
| (3) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| 5.6.2.1. Sealing and Drainage | |
| (1) | [F61,F62-OH1.1,OH1.2,OH1.3] |
| [F61,F62-OS2.3] | |
| 5.6.2.2. Accumulation and Disposal | |
| (1) | [F30-OS3.1] |
| (2) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| (3) | [F61-OH1.1,OH1.2,OH1.3] |
| [F60-OS2.3] [F21-OS2.2] | |
| (b) [F21-OP2.6] | |
| (4) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| 5.7.1.1. Prevention of Accumulation and Ingress | |
| (1) | [F60-OH1.1,OH1.2,OH1.3] |
| [F60-OS2.3] | |
| (2) | [F61,F80-OH1.1,OH1.2,OH1.3] |
| [F61,F80-OS2.3] | |
| (3) | [F60-OH1.1,OH1.2,OH1.3] |
| [F60-OS2.3] | |
| 5.8.1.1. Required Drainage | |
| (1) | [F60-OH1.1,OH1.2,OH1.3] Applies to portion of Code text: “… the bottom of every exterior foundation wall and every floor-on-ground shall be provided with drainage.” |
| [F60-OS2.3,OS2.2] Applies to portion of Code text: “… the bottom of every exterior foundation wall and every floor-on-ground shall be provided with drainage.” | |
| 5.8.1.2. Drainage Materials and Installation | |
| (1) | [F60-OH1.1,OH1.2,OH1.3] |
| [F60-OS2.3] [F21-OS2.2] | |
| 5.8.2.1. Required Moisture Protection | |
| (1) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| 5.8.2.2. Protective Material and Component Properties | |
| (2) | [F61-OS2.3] |
| [F61-OH1.1,OH1.2,OH1.3] | |
| (3) | [F61-OS2.3] |
| [F61-OH1.1,OH1.2,OH1.3] | |
| (4) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| (5) | [F61-OH1.1] [F20,F61-OH1.2,OH1.3] |
| [F61-OS2.3] | |
| (6) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| (7) | (b) [F61-OH1.1,OH1.2,OH1.3] |
| (b) [F61-OS2.3] | |
| 5.8.2.3. Installation of Moisture Protection | |
| (1) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| (2) | [F61-OH1.1,OH1.2,OH1.3] |
| [F61-OS2.3] | |
| 5.9.1.1. Sound Transmission Class | |
| (1) | [F56-OH3.1] |
| 5.9.1.2. Required Protection from Noise | |
| (1) | [F56-OH3.1] |
| (2) | [F56-OH3.1] |
| 5.10.1.1. Compliance with Applicable Standards | |
| (1) | [F51,F54,F55,F61,F63,F80-OH1.1,OH1.2] [F41,F55-OH1.1] [F55,F61,F80-OH1.3] |
| [F20-OS2.1] [F51,F61,F63,F80-OS2.3] [F51-OS2.5] | |
| [F80,F61,F63-OS3.1] | |
| [F80,F61,F63-OH4] Applies to floor assemblies. | |
| (a) [F61,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators. | |
| 5.10.2.2. Applicable Standards | |
| (1) | [F20,F55,F61,F63-OH1.1,OH1.3] [F20,F55,F61,F63,F81-OH1.2] |
| [F20,F55,F61-OS2.3] | |
| [F20,F55,F61-OP2.3] | |
| 5.10.2.4. Heat Transfer | |
| (2) | [F63-OH1.1,OH1.2] |
| [F63-OS2.3] | |