Division A
Compliance, Objectives and Functional Statements

Part 3 — Functional Statements

Section 3.1. Application

3.1.1. Application

3.1.1.1. Application
1) This Part applies to all buildings covered in this Code. (See Article 1.1.1.1.)
3.1.1.2. Application of Functional Statements
1) Except as provided in Sentences (2) and (3), the functional statements described in this Part apply
a) to all buildings covered in this Code (see Article 1.1.1.1.), and
b) only to the extent that they relate to compliance with this Code as required in Article 1.2.1.1.
2) Functional Statement F56 applies only to dwelling units.
3) Functional Statements F73 and F74 do not apply to
a) change beginGroup C dwelling units, row houses, boarding houses and lodging houses,
b) Group C apartment and condominium buildings except to the extent described in Article 3.8.2.27. of Division B,
c) Group E shops and stores with a total retail floor space of less than 50 m2 (See Appendix Note A-3.8.2.1.(2)(e) of Appendix B),change end
d) Group F Division 1 occupancies, and
e) buildings that are not intended to be occupied on a daily or full-time basis, including automatic telephone exchanges, pump houses and substations.

contentHistory